Computer-Kabeltester

Crimping Cutter Tool With Stripper 1 x Crimping Cutter Tool With Stripper. Suited for network cable with RJ45 CAT5, CAT6 & CAT7 Connector and ADSL Cable with RJ11 Connector. RJ45 Multi- Purpose Punch Down Tool .

RJ45 Crimping Tool Cable Cutter. 1 x RJ45 Crimping Tool. Standard Cat5e RJ45 network cable connector. Suited for network cable with RJ45 Connector and ADSL Cable with RJ11 Connector. RJ45 Connectors.

1X LED Light Lan Réseau Testeur de Câble RJ11 RJ45 Test Réseau Outil Vert CHAUDE Testez en conséquence les câbles à double torsion 1, 2, 3, 4, 5, 6, 7, 8 et au sol Capable de juger mauvaise connexion, court-circuit et circuit ouvert Testeur de câble pour RJ11, RJ45.

Crimping Cutter Tool With Stripper. Suited for network cable with RJ45 CAT5, CAT6 & CAT7 Connector and ADSL Cable with RJ11 Connector. RJ45 Multi- Purpose Punch Down Tool. 1 x Crimping Cutter Tool With Stripper.

Dimension: 14.5x8.6x2.8cm With RJ45, RJ11 and USB interfaces Powered by DC 9V battery (not included) Functions: Monitoring video cable, telephone cable, Network cable, USB cable and testing open circuit, short circuit and reverse connection quickly Suitable for USOC 4/6/8 Ethernet 10 Base T/10 Base 2/ TIA 568 A/B 258A/TokenRing etc.

Tester progettato per verificare facilmente il corretto cablaggio di cavi di rete lan RJ45, telefonici RJ11 e USB di tipo A-A ed A-B (per stampante). Strumento essenziale per testare rapidamente l' integrità ed il corretto funzionamento dei cavi di rete / telefono / USB. Questo prodotto può essere utilizzato per testare l' intera rete o cavi patch individuali. Viene fornito con un kit remoto, che consente ad una sola persona di testare cavi fino a 1000 piedi di lunghezza (circa 305 Metri). L'unità principale e la secondaria separata permettono, infatti, l'intervento di un singolo operatore. Se bisogna testare un cavo installato a distanza, è possibile usare il terminale remoto.

Standard Cat5e RJ45 network cable connector. Snagless boot/s for CAT5 / CAT5E / CAT6 Networking Cable. RJ45 Connectors Compatible to standard RJ45 sockets. RJ45 Boots RJ45 Crimping Tool Cable Cutter.

CAT3, RJ11, RJ12 6P6C,6P4C, 6P4C. RJ45, CAT5, CAT5e, CAT6, 8P8C. It builds in power switch for power saving, 9 LED lights to indicated wiring connection on both remote and master unit. It is capable to judge wrong connection, short circuit and open circuit.

Crimping Cutter Tool With Stripper. 1 x Crimping Cutter Tool With Stripper. RJ45 RJ11 Network Cable Tester. RJ45 Multi- Purpose Punch Down Tool. 1 x RJ45 Multi- Purpose Punch Down Tool. Suited for network cable with RJ45 CAT5, CAT6 & CAT7 Connector and ADSL Cable with RJ11 Connector.

Moreover, it has other useful functions including continuity testing, network cable sequence collation, open/short circuit testing and DC level testing. - Open, short and cross of LAN cable. The receiver have both sound and LED signal indicators.

Send a single solid tone or dual alternating tone to the object cables or wires. Compatible with all common tracing tone sources. Test whether a cable is interrupted. Find interrupts in cable. Tracing a wire.

Network cable tester that will check continuity in your ethernet (RJ45) and coaxial (BNC) cables. Network Cable Tester with Remote for BNC RJ45 Model TL 428. Coaxial Cable (BNC). It not only works as a continuity tester, but equally as important, shows you exactly what kind of network cable you have and indicates any potential problems via the LED's.

Send tone frequency: 1.5kHz. Always turn off power before using on any mains cables. Handy carry case. 2 x 9V battery. CE Certified. Emitter weight: 114g (including battery). Receiver weight: 106g (including battery).

Automatic scan for the wrong wiring or disorder cable. RJ45 Cable Tester Suited for network cable with RJ45 Connector and ADSL Cable with RJ11 Connector. Standard Cat5e RJ45 network cable connector.

Suited for network cable with RJ45 CAT5, CAT6 & CAT7 Connector and ADSL Cable with RJ11 Connector. Crimping Cutter Tool With Stripper. RJ45 RJ11 Network Cable Tester. RJ45 Multi- Purpose Punch Down Tool.

(2) Fluke PM06. DSP-4300SR Smart Remote. (1) DSP-LIA012 channel adapter for cat 6 / class E, (1) DSP-LIA013 channel/traffic adapter for cat6/class E. Serial data cable. (2) DSP-LIA102 permanent link adapters.

RJ45 Crimping Tool Cable Cutter. 1 x Crimping Tool. Suited for network cable with RJ45 Connector and ADSL Cable with RJ11 Connector. 1 x Cable Tester. The mouth of the press-pliers is made of magnetic steel, which is hard and durable.

Testeur RJ 45 RJ 11. Idéal pour tester un cable que l'on vient de faire. Possibilté de tester un cable avec les extrémités dans 2 pieces différentes. Video will open in a new window[isdntekvideo]. Fonctionne avec une pile de 9 V non fournie.

Works with Cat5 & Cat6 cables. PoE Tester. Identify Alternative A and Alternaive B pin outs, and 4 pin detection. With Cable. Curtain Wire. Wild Bird & Wildlife. Hair Dyers & Straighteners. Shoe & Foot Care.

Cable Tester for RJ11, RJ45. 1 x NS-468 Cable Tester. Cable Tester (network cables, phone lines, coaxial cable, buried cable and even cable behind wall) Function - Check the working state of each wire.

This T1 CSU/DSU Loopback Plug with Pin-1 connected to pin-4 and Pin-2 connected to Pin-5 is useful for the hardware loopback plug testing. T1 CSU/DSU Hardware loopback plug testing. Pinout: (1-4), (2-5).

The NT-468 Network Cable Tester tests the functionality of network cables with twisted pair, straight and crossover wire configurations.  Resolving network connectivity issues is often a mere process of elimination.  This network cable tester helps determine determine whether or not a network cable is the source of the problem. To use, connect one end of the network cable to the "Master" controller and the other end to the "Remote".  Turn the switch found on the Master controller to the on position to begin testing.  If the network cable is working properly, the Master controller and the Remote will illuminate sequentially with green lights.

RJ45 RJ11 RJ12 Network Cable Tester. Quickly and easily check network cables and RJ11 cables. This LAN Network Cable Tester is required for network installation RJ-11, RJ-12, RJ-45, CAT5, CAT5e, 10/100BaseT, TIA-568A/568B, AT&T 258-A.

When paired with the optional Fluke DSP-FTK Fiber Test Kit, the DSP-4000 series detects bad connections, bad splices, broken fibers, and loss of power from bends and fiber-type mismatches. Coax Patch Cable (BNC).

1x RJ11 Cable. Use the probe of receiver to find target wire at the other end. 1x RJ45 Cable. 1x Cable with crocodile clamp. Colour: Yellow. Signal output electric status: 8Vp-p. Signal transmission format: multi-frequency impulse.

Crimping Cutter Tool With Stripper. 1 x Crimping Cutter Tool With Stripper. Suited for network cable with RJ45 CAT5, CAT6 & CAT7 Connector and ADSL Cable with RJ11 ConnectorRJ45 RJ11 Network Cable Tester.

Tracing distance Max. (RJ45,RJ11,BNC) 1000m, 3300 feet. Length distance Max. (RJ45,RJ11,BNC) 2000m, 6600 feet. Ports RJ45(Ping/POE), RJ11, Coxial, BNC. Ports RJ45, RJ11, BNC. Cable hunting RJ45, RJ11, BNC.

Ventilateurs 120 mm Silencieux 2300 rpm. Vitesse/speed : 2300 trpm/rpm /- 2%. Bruit /noise 32 dba à 2300 tours. Taille /Size : 120 mm. Avec vis With screws. intensité : 0.45A.

Quickly and easily check network cables and RJ11 cables. This LAN Network Cable Tester is required for network installation RJ-11, RJ-12, RJ-45, CAT5, CAT5e, 10/100BaseT, TIA-568A/568B, AT&T 258-A. RJ45 Network Cable Tester tests double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground, 9 LED lights to indicate wiring connection on both remote and master unit.

Moreover, it has other useful functions including continuity testing, network cable sequence collation, open/short circuit testing and DC level testing. The receiver have both sound and LED signal indicators.

1-2-3-4-5-6 RJ11. Remote tester: 1-2-3-4-5-6-7-8-G RJ45. If test patch panels or wall plate outlels, two cables which can match each other (RJ45) will be connected to the tester. tester and remote tester.

NEW, NEVER USED Genuine Fluke MS2-TTK KIT. Otherwise, the order must be delayed and/or cancelled.

Network cable tester for testing RJ11, RJ12, RJ45 and BNC cables with both straight and crossed connections. Requires 1x PP3 battery (not included). The Network Cable Tester from our Range. Width (mm) - 92.

The LinkSprinter Network Tester can even run without batteries on PoE. LinkSprinter is a pocket-sized Ethernet tester that provides complete end-to-end network connectivity testing and automated cloud-based reporting all with the touch of a button.

Fluke OneTouch Series II 10/100 Network Tester w/ Options: (BC# 20139). Fluke Networks OneTouch Series II 10/100 Network Assistant With SII Pro & ITO Options Installed. OneTouch Series II vs OneTouch Series II Pro.

Can test RJ11/ RG45/ USB. RJ11/ RG45 are equipped with 50u" gold plating. 1 x 4-in-1 Network Cable Tester. short wire testing. Clear reading for wire status. cable length: 1000ft. Fast speed in testing.

52801009 TS52 PRO Test Set with ABN. Tone & pulse dialing. Line cord strain relief. Data lockout with data lockout override. Low battery indication. Data indication – warns when data is present.

Use the probe of receiver to find target wire at the other end. 1 X Cable with crocodile clamp. 1 X RJ45 network cable. Signal transmission format: multiple frequency impulse. Distance of signal transmission: >3km.

Fluke Networks CableIQ Advanced IT Kit The CableIQ Advanced IT Kit is designed to maximize the efficiency of any cable qualification job. The rugged carry case can be used to easily port tools from one job to another.