Computer-Netzteile-Tester

ATX, BTX, and ITX compliant power supplies can be tested. Simple and easy to use, no batteries are needed. The 12 V, 3.3 V, and 5 V LEDs will light if their corresponding power outputs are good, and reamian off if the power outputs fail.

Specification: Product type: PC 20/24 Pin ITX ATX BTX LCD Power Supply Tester. Interface Type: 20/24pin (ATX-connector). Voltage Test: +12V, -12V, +5V, -5V, +3.3V, 5V Stand by (SB), 12V Power Good Connectors: floppy, HDD, CDROM, SATA, 4pin (P4), 8pin (Dual-CPU), 6pin (PCI-Express) Material: Plastic & Electronics Dimension: approx. 96 x 62 x 20mm\3.7''*2.44''*0.78'' Color: Black Net Weight: 63g Package Included: 1PC*LCD Power Supply Tester.

Make: HP - Agilent - Keysight. Model: 6267B. Tested Good.

BTX, and ITX compliant power supplies can be tested. Support 20Pin, 24Pin ATX Interface. The power 20PIN or 24PIN and P4, P6 or P8 plug into the power tester corresponding position. (If the plug 20PIN or 24PIN interface test and display LL alarm, then, is the need to plug 4P Oh! ).

Best Solutions in US on Networking with Cisco, HP, Juniper ! If you had any bad experience with the product(s), don't hesitate to. We can help you with. They will gladly help you. If you need help with.

Make: HP - Agilent - Keysight. Model: 6031A. Tested Good.

The Power Judge will give you the answer!

BTX, and ITX compliant power supplies can be tested. Compatible with ATX, BTX, ITX. Simple and easy to use, no batteries are needed.

Rui Deng UMC24 USB Color Display Tester. Refresh rate:2Hz. Load impedance range:1.5-9999.9Ω. 1 x UMC24 USB tester. Energy accumulation range:0-99999mWh. Capacity accumulation rannge:0-99999mAh. One of the most comprehensive USB power testing modules.

The 10KV unit contains many of the features of the 500VA Tester, including programmable min/max limits, setup storage, and arc detection. Model: Guardian 10KV. Make: Quadtech. In all cases, both high and low limits are operator programmable for quick, and easy pass/fail testing.

OLED USB Power Meter can help you easily identify the best cables for USB charging. It shows the voltage, watts, amperage, and the mAh being delivered to your devices. Bright clear display is easy to read and rotation screen for best review.USB Charging MonitorTL59 shows 4 essentials simultaneously, current, voltage, power and capacity. It is a handy gadget for discovering how much power your USB ports will put out, how much your device will actually draw, how much it takes to fully charge a device, etc.OLED Screen0.91inch OLED display is bright enough to see both indoor and outdoor. Current, voltage, and power (current multiplied by voltage) are continuously displayed, and capacity (in mAh) accumulates as long as the input power remains on.Milliampere Accumu.

100%25 Brand New & High QualitySize:60 x 24 x 14(mm)Weight:0.10gInput Voltage: 3V - 30V Input current : 0 - 5.1A Cumulative capacity range: 0-99999 mah precision: 0.001 AhCharge accumulation scope: 0-999999 MWH precision: 0.001 WhCumulative power range: 0-299.999W precision: 0.001WTiming the maximum range: 0-999 hours 59 minute 59 seconds precision: 1 secondParameters that you can test: Voltage of battery. Current of battery, discharge capacity of battery,Quantity of electric charge,power of battery,timing.Communication function: YesParameters adjusting function :Yes. Equipment for parameters adjustment: One electronic load,one constant current source. Voltage of constant current source should be set to 8.5V There are 3A, 2A, 1A and 0.3A models for current adj.

Used but appears to be in good usable condition.

Stecken Sie den 24 polige Mainboard-Stecker und die 4, 6 und 8 polige Zusatzstecker (falls vorhanden) des Netzteils in die entsprechenden Buchsen des Testers. Festplatte und CD-ROM Laufwerke SATA und IDE (ATE / PATA).

EVERYTHING TESTED AND WORKS GREAT. SEE PICS TO SEE WHAT YOU WILL BE RECEIVING. THIS WOULD BE AN EXCELLENT GIFT. THIS IS 100%25 AUTHENTIC. THERE IS NO RESERVE FOR THIS ITEM.

BTX, and ITX compliant power supplies can be tested. Compatible with: ATX, BTX, ITX.

MULTIFUNCTIONAL USB TESTER: USB Meter Tester is mainly used to detect USB charging current, voltage, discharge capacity, quantity of electric charge, power, timing and so on. It supports QC2.0/QC3.0,BC1.2,Apple Iphone 2.4A and other protocol quick charging styles of cellphone and chargers.UILT-IN MORE SAFETY: Real-time monitoring of charge data, USB monitor will automatically cut off when the device is full charged, makes it controllable and more secure when charging, effectively protect your device.PREMIUM LCD DISPLAY: to monitor the parameters on the screen. Comes with three various display modes for your choosing. It allows you to find the charging problem of the USB cables, wall chargers, and car charges more easily.WIDE TESTING RANGE & SIMPLE OPERATION:.

Display screen: 0.91" OLED screen. Compatibility: USB 2.0. Energy accumulation range: 0-99999mWh-700Wh. Capacity resolution: 1mAh. Current accuracy: ± (0.5%25 + 2digit).

USB Load Tester 1A 2A Current Switchable Resistive Load. Resistive load that can be switched between 1 Amp or 2 Amp current. Bi-Colour LED indicates power on and load setting. Green for 1A, Red for 2A.

This tester is ideal for testing the functionality of all of the old USB power supplies you have accumulated. The laptop, cable, USB cord and/or any other item shown in the pictures is for functionality display purposes only and are not included.

BTX and ITX compliant, power supplies can be tested. 5.25" PC HDD CPU. Male/Female 4 Pin. We strive to provide the best deals to you and help you make your project successful. Size ( about ): 12 x 6 x 2 cm.

As is the case with most backup tapes, the total data storage space can be increased to 70 GB if the data is saved in a 2:1 compressed format. It can be used to archive important files so that they are protected from harm.

New - Ultimate 20/24Pin SATA Power LCD Display Power Supply Tester, PST-3 style. Condition is New. Shipped with USPS First Class Package (2 to 3 business days).

Item specifics%0aCondition:%0aNEW without pack%0a%0aBrand: %0aAPC%0aMPN: %0aAP9567

Checks 20/24-pin ATX (motherboard) Power, SATA (hard drive) power, Molex (old hard drive) power, Mini-molex (floppy) power, and 6-pin PCI-e (graphics card) connectors%0a<br />Checks Ground, +3.3V, +5V, +12V, -5V, and -12V lines%0a<br />Easy to use, just plug in connectors and green LEDs illuminate to show which pins are getting power%0a<br />Power supply will automatically turn on when connected%0a<br />%0a<br />Test computer power supplies with this simple power supply tester.  It checks to the voltage on all wires to ensure that the power supply is functioning properly.

Output current max 5A. Switch-mode 13.8V Bench Top Power Supplies. Ideal for powering CB Radios, communication transceivers and other appliances. Sturdy case fitted with a mains lead and plug. Power lead length 1.6m.

Current: 0A-2.5A error 0.01A.

It's that simple! Also backwards compatible with older 20 pin form factor power connectors. Built-in 25W 5.4 Ohm load generates steady outputs. US funds only. S&H fees are not negotiable.

Condition is New.

Comprehensive 7 in 1 Power Output Tester.

Model: 6205C. Make: HP - Agilent - Keysight. Tested Good.

Model: UT658. Current monitoring range 0A~3A 'OL' is displayed when greater than 3A. Capacity 0~9999mAH Portable battery capacity. Capacity data storage 10 sets.

The operation instruction on the face of tester. 5.25" PC HDD CPU. Male/Female 4 Pin. Green indicator light = power is ok. We strive to provide the best deals to you and help you make your project successful.

Test your power supply and avoid damage to your expensive computer equipment with this ATX power supply tester. Simple and easy to use, no batteries are needed. Connect to the power supply's 20-pin Molex connector. Equipped with +3.3V, +5V, +VSB, -5V, -12V and +12V leads for monitoring voltage output.

24 pins ATX computer power sockets, compatible with 20 pins plug.

ATX P.G. Value Display. ATX Output Connector’s Check. Easy to Read Digital LCD Display. Connector Style: Floppy, HDD, CD-Rom, SATA, 4-Pin (P4). OS Support: Windows XP/Vista/7/8/10, Mac OS10x & Above.