• Neues AngebotSteam Engine Air Compressor 6mm thread (5mm available) Wilesco/Mamod + *smoke

    BRASS fitting to boiler is 6mm thread 0.75pitch 4mm plastic tube which fits late model Wilesco. (see picture of BRASS fitting on boiler). (smoke not suitable for Mamod with fixed chimney). Wilesco D16 in photo.
    CHF 7,87
    Aus Großbritannien
    CHF 7,55 Versand
  • METRIC PRESSURE GAUGE

    THE UNION NUT HAS A STANDARD 3/16" X 40TPI THREAD. BY REMOVING THE NUT AND LINER, THE GAUGE WILL FIT DIRECTLY ON THE CLEVEDON STEAM SYPHON PIPE. THE SQUARE ON THE BOTTOM OF THE GAUGE SHOULD BE HELD IN A SPANNER WHILE TIGHTENING THE UNION NUT.
    CHF 32,84
    Aus Großbritannien
    CHF 5,91 Versand
    37 verkauft
  • 25 various live model steam engine plans PDF format

    There are also a few steam engines that include the clayton steam truck, cracker steam engine and a traction engine. Below is a list of the plans ideal for any hobbyist that loves steam to have a crack at building their very own steam model.
    CHF 1,31
    Aus Großbritannien
    Kostenloser Versand
  • TUCHER WALTHER LIVE STEAM BOAT VICTORIA LUISE ~ 25+ INCH LONG 

    CHF 394,11
    Aus Großbritannien
    CHF 31,87 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
    oder Preisvorschlag
    12 Beobachter
  • Twin Cylinder Single Acting Oscillating Steam Engine

    Up for sale is this twin cylinder single acting oscillating steam engine. Ready to run on air but would need a lubricator for best results on steam. boat or power plant.
    CHF 151,08
    Aus Großbritannien
    CHF 17,08 Versand
  • Neues AngebotGENUINE NEW & SEALED STUART MODELS LIVE STEAM ENGINE DISPLACEMENT LUBRICATOR

    FACTORY MACHINED BY STUART. ALL ORIGINAL NEW AND SEALED. ALSO A VERY NICE FACTORY MACHINED 10V STATIONARY ENGINE.
    CHF 59,10
    Aus Großbritannien
    CHF 15,76 Versand
  • Mamod TE1A Live Steam Traction Engine, Ready Built Working Model - Great Fun

    The Mamod TE1A is highly detailed, built of heavy-gauge steel and brass with a green painted brass boiler, water level gauge and safety valve. The spoked diecast flywheel runs a drive belt connected to the rear wheel.
    CHF 260,10
    Aus Großbritannien
    CHF 22,06 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
    25 verkauft
  • Genuine Mamod Steam Engine Waxed Solid Fuel Tablets Box of 20 - Brand New In Box

    This is a genuine Mamod spare part. Solid fuel tablets for use with all Mamod steam engines. Can also be used with other steam engines e.g. Wilesco, etc. TIP: If you fill the boiler with hot water then half a tablet will often give a good steam!
    CHF 11,17
    Aus Großbritannien
    CHF 11,01 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
  • NEW MAMOD SPARES STD SAFETY VALVE 1/4 X26 TPI

    The UKs leading toy steam dealer.
    CHF 14,78
    Aus Großbritannien
    CHF 9,85 Versand
    Nur noch 1 verfügbar!
  • (FS)NEW GAS TANK REFILL VALVE

    RONSON TYPE
    CHF 9,18
    Aus Großbritannien
    CHF 12,48 Versand
    223 verkauft
  • Mamod Standard Steam Whistle Assembly

    This is a genuine Mamod spare part. Common Mamod steam whistle with long steel lever. Used on their range of traction engines, steam rollers and static engines.
    CHF 20,35
    Aus Großbritannien
    CHF 11,13 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
  • STEAM/LIVE STEAM GENUINE MAMOD SPARES NEW SOLID FUEL BURNER TRAY

    We also carry the full range of Bix model gas system products such as ceramic burners ,gas tanks, valves, pipework and adapters. Check out our prices you will be surprised ! Also full uk Wilesco warranty and free technical back up as with all our products.
    CHF 16,28
    Aus Großbritannien
    CHF 12,48 Versand
    35 Beobachter
  • Mamod Joined 12" Driving Bands (2 off) for Traction Engine or Steam Roller

    Standard 12" joined drive band belts for the Mamod TE1A traction engine or SR1A steam roller. This is a genuine Mamod spare part.
    CHF 6,56
    Aus Großbritannien
    CHF 10,94 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
  • Mamod Burner Tray for TE1a, SR1a, etc Live Steam Engines

    Mamod burner tray for use with solid fuel tablets on model steam engines.
    CHF 18,06
    Aus Großbritannien
    CHF 11,10 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
  • MAMOD LIVE STEAM TE1A GREEN TRACTION ENGINE. NEW IN BOX TYRES AS STD

    New in the box this Mamod live steam 1313 greenTE1A traction engine with tyres as std. Sorry we are unable to send without this information. Check out our prices you will be surprised ! EST 1999.
    CHF 256,16
    Aus Großbritannien
    CHF 45,98 Versand
  • Mamod Live Steam Standard Safety Valve 1/4" Diameter X005

    This is a genuine Mamod spare part. Standard Mamod brass safety valve 38 mm in length, as used on the Traction Engines, Steam Rollers and Static Engines.
    CHF 16,41
    Aus Großbritannien
    CHF 11,07 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
  • Proops 5 BA / B A Die Model Engineer Vintage Cars & Bikes O.D 2OMM M0175

    5 BA DIE MADE FROM CARBON STEEL.
    CHF 3,15
    Aus Großbritannien
    CHF 1,58 Versand
  • Proops 12 BA / B A Die Model Engineer Vintage Cars & Bikes O.D 2OMM M0902

    12 BA DIE MADE FROM CARBON STEEL.
    CHF 3,15
    Aus Großbritannien
    CHF 1,58 Versand
    60 verkauft
  • Proops 1 BA / B A Die Model Engineer Vintage Cars & Bikes O.D 2OMM M0171

    1BA DIE MADE FROM CARBON STEEL.
    CHF 3,15
    Aus Großbritannien
    CHF 1,58 Versand
  • Proops 2 BA / B A Die Model Engineer Vintage Cars & Bikes O.D 2OMM M0172

    2 BA DIE MADE FROM CARBON STEEL.
    CHF 3,15
    Aus Großbritannien
    CHF 1,58 Versand
  • 40 Mamod Steam Engine Waxed Solid Fuel Tablets in Boxes

    This is a genuine Mamod spare part. Two boxes of solid fuel tablets for use with all Mamod steam engines. Can also be used with other steam engines e.g. Wilesco, etc. TIP: If you fill the boiler with hot water then half a tablet will often give a good steam!
    CHF 18,39
    Aus Großbritannien
    CHF 11,10 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
  • CT2620 Mini Pipe, Tube Bender Model Making Tools Suit Scratch Build Steam Engine

    Ideal For Loads OF Model Making Including Scratch Built Steam Powered Vehicles. Aluminium, Mild Steel, Brass And Copper.
    CHF 18,38
    Aus Großbritannien
    CHF 4,58 Versand
    36 verkauft
  • Proops 3 BA / B A Die Model Engineer Vintage Cars & Bikes O.D 2OMM M0173

    3 BA DIE MADE FROM CARBON STEEL.
    CHF 3,15
    Aus Großbritannien
    CHF 1,58 Versand
    53 verkauft
  • Proops 2mm Metric Die Model Engineer Vintage Cars & Bikes M0182

    CHF 3,55
    Aus Großbritannien
    CHF 1,97 Versand
    78 verkauft
  • 5" Gauge Bogie Brake Kit**NEW**

    This 5” bogie brake kit has been designed to look authentic yet provides effective braking with little force required. The traditional type friction brake blocks are made of steel and are linked together via a system of levers and push rods.
    CHF 72,25
    Aus Großbritannien
    CHF 19,71 Versand
  • HIGH PRESSURE SAFETY VALVE

    THE VALVE CAN BE ADJUSTED BY TURNING THE TOP CAP WITH A SLOTTED SCREWDRIVER. HIGH PRESSURE SAFETY VALVE FOR MODEL STEAM BOILERS.
    CHF 15,76
    Aus Großbritannien
    CHF 5,91 Versand
    44 verkauft
  • IMPERIAL PRESSURE GAUGE

    THE UNION NUT HAS A STANDARD 3/16" X 40TPI THREAD. BY REMOVING THE NUT AND LINER, THE GAUGE WILL FIT DIRECTLY ON THE CLEVEDON STEAM SYPHON PIPE. THE SQUARE ON THE BOTTOM OF THE GAUGE SHOULD BE HELD IN A SPANNER WHILE TIGHTENING THE UNION NUT.
    CHF 32,84
    Aus Großbritannien
    CHF 5,91 Versand
    64 verkauft
  • WATER GAUGE FITTINGS

    WATER GAUGE FITTINGS FOR MODEL STEAM BOILERS.
    CHF 22,33
    Aus Großbritannien
    CHF 5,91 Versand
    17 Beobachter
  • Mamod & Wilesco Canopy Bar Brass Top Rail Dressing Accessory / Enhancement

    FITS ANY MAMOD OR WILESCO. MAMOD & WILESCO. SOLID BRASS TOP CANOPY DRESSING. TRACTION ENGINE OR ROLLER WITH A CANOPY.
    CHF 11,15
    Aus Großbritannien
    CHF 3,93 Versand
  • MAMOD LIVE STEAM LOCOMOTIVE LOCO ~ O GAUGE - BLACK - SPARES OR REPAIR

    Here we have the Mamod SL Live Steam Locomotive in Black. In used condition. You will also need a funnel, instructions and fuel tablets unless you already have these. In Black so built from the kit SLK1 (Live Steam Construction Series).
    CHF 170,78
    Aus Großbritannien
    CHF 22,33 Versand
    31 Beobachter
  • Mamod Steam Roadster (UNIQUE TO US) SA1 Screen

    MAMOD & WILESCO. SCREEN AND FITTINGS ONLY MODEL NOT INCLUDED.
    CHF 14,12
    Aus Großbritannien
    CHF 2,96 Versand
  • A fine and well machined Stuart Turner Live Steam Engine

    Stuart Turner steam engine. Similar style to the Stuart No.8 but smaller. To give you an idea, it will run by just blowing down the copper pipe with your mouth!
    CHF 459,79
    Aus Großbritannien
    CHF 28,07 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
  • NEW BIX REPLACEMENT HORNBY STEVENSONS ROCKET LOCO GAS FUEL TANK

    THIS ITEM NOW PAINTED BLACK.
    CHF 49,92
    Aus Großbritannien
    CHF 12,48 Versand
  • 1/8'' square teflon coated yarn - 2ft length - live steam

    1/8" square section x 2ft length. Great for traction engines, live steam locos etc. temp range from -200c to 300c.
    CHF 10,51
    Aus Großbritannien
    CHF 2,63 Versand
  • GENUINE MAMOD SPARES EXTRA POWER PISTON/CYLINDER (STD ON NEW MODELS)

    Check out our prices you will be surprised ! Also full uk Wilesco warranty and free technical back up on all steam products sold by us. MAMOD & WILESCO. THE UKS NO 1.
    CHF 23,06
    Aus Großbritannien
    CHF 12,48 Versand
  • GAS CAN VALVE

    THIS VALVE IS FOR USE WITH DISPOSABLE GAS CANS WITH A THREADED OUTLET SUCH AS COLEMAN, PARASENE, TAMAR ETC. THIS ENABLES THE USER TO RUN THEIR BOAT WITH A DISPOSABLE GAS CAN INSTEAD OF A REFILLABLE GAS TANK.
    CHF 23,65
    Aus Großbritannien
    CHF 5,91 Versand
    18 verkauft
  • Stuart Turner 10V Steam engine

    Stuart Turner 10v Vertical Live Steam Engine. Weight: 1kg.
    CHF 348,13
    Aus Großbritannien
    CHF 24,83 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
  • LIVE STEAM Scratcbuilt Large Boat Steam Launch NICE Mamod Engine RUNS WELL

    Large Boat Steam Launch with Mamod Engine. The engine runs well, it brought up steam quite quickly, and with a little nudge it was off. There was a slight leak of water from the cylinder to begin with.
    CHF 249,59
    Aus Großbritannien
    CHF 29,94 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
    34 Beobachter
  • Live Steam Triple Marine steam engine

    An interesting triple marine steam engine, mounted to wooden base, with driveshaft connected to a brass propeller. The small hinged cap to one of the oil covers is missing (see photo). Desktop users: Below is a video of this item.
    CHF 1.116,64
    Aus Großbritannien
    CHF 62,32 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
    21 Beobachter
  • Unused Pull Type Whistle Ideal For Mamod & MSS Live Steam Engine Models

    CHF 16,75
    Aus Großbritannien
    CHF 11,17 Versand
    Nur noch 1 verfügbar!
  • ELMERS 33 MILL ENGINE KIT

    Here we have put together a kit of materials which will produce, after you have applied your engineering skills and knowledge, a working Mill Engine model. If you type this into your search engine, you will see many fine examples of completed and working Mill engines.
    CHF 77,51
    Aus Großbritannien
    CHF 19,61 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
    17 verkauft
  • A FINE WELL MACHINED EARLY STUART TURNER 10v VERTICAL LIVE STEAM ENGINE

    THIS IS FOR A BEAUTIFUL EARLY STUART TURNER 10v VERTICAL LIVE STEAM ENGINE.
    CHF 387,54
    Aus Großbritannien
    CHF 19,77 Versand
    oder Preisvorschlag
    26 Beobachter
  • MODEL MODS TYRES FOR USE WITH WILESCO ENGINES (TYRES ONLY)

    MODEL MODS TYRES FOR USE WITH WILESCO ENGINES (#191130219648. you WILL RECEIVE 1 SET OF TYRES 2 FRONT 2 BACK. ).
    CHF 5,90
    Aus Großbritannien
    CHF 5,24 Versand
    150 verkauft
  • (FS) GAS REFILL ADAPTER

    STEM IS 3/16 /4.75MM DIA. YOU CAN THEN REFILL ANY REFILLABLE TANK.
    CHF 22,32
    Aus Großbritannien
    CHF 12,48 Versand
    110 verkauft
  • STUART MODELS STEAM HAMMER CASTINGS, LIVE STEAM

    The other smaller castings and parts are readily available from Stuart models. This is an opportunity to buy the larger and more expensive castings at a substation cost saving (they are £177.12 from Stuart's).
    CHF 124,80
    Aus Großbritannien
    CHF 22,16 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
    14 Beobachter
  • Live Steam 1 Inch Minnie Rare Model Traction Engine

    Live Steam 1 Inch Minnie Rare Model Traction Engine Dated to around 1981. Has had a recent repaint and looks nice with it. Has the potential to steam but will need a service first. Has a copper boiler which is in good condition. Mechanically it all turns over fine and I really don’t see any reason for it not to work. Measures: 44cm length, 21cm width, 30cm height. Please take a good look at photos.
    CHF 2.231,97
    Aus Großbritannien
    CHF 111,28 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
    oder Preisvorschlag
    41 Beobachter
  • WILESCO TRACTION ENGINE & ROLLER Boiler Band Single

    WE LIST THEM FOR MAMOD TE1/TE1A/SW1/SR1/SR1A & WILESCO. MAMOD & WILESCO. SINGLE BRASS BOILER BAND AND BRASS FIXINGS. ONLY £5.99 ! (AT REALISTIC COST OF ONLY £1.95).
    CHF 7,87
    Aus Großbritannien
    CHF 2,56 Versand
  • Stuart Turner No.9 steam engine

    "The Stuart No.9 is regarded by many as the most attractive engine in the Stuart range. The No.9 is typical of the large powerful Steam Engines installed in factories and mills to provide power. As a steaming model or a static display the Stuart No.9 is a fine example of model engineering.".
    CHF 1.280,85
    Aus Großbritannien
    CHF 92,52 Versand
    Zollabfertigungsservice und internationale Sendungsverfolgung eingeschlossen
    16 Beobachter